Item# Description Qty Item# Description Qty
1 Tank 1 18B 3/8" Steel Sand Control Valve 1
2 Wheel 2 18C 3/8" Steel Shut Off Valve 1
3 Cotter Pin 3 19 Male/Female Adapter 1
4 Foot 1 20 3/8" 1/4" Nipple Connector 1
5 Axle 1 21 Air Hose 1
6 * Handle Bar 2 22 Sand Outlet Manifold 1
7 Handle Grip 2 23 Hose Clamp 2
8 Pan Screw 4 24 Sand Hose 1
9 Hex Nut 4 25 Hose Adapter 1
10 Safety Valve 1 26 Gasket 1
11 O-Ring 1 27A 9/64" Nozzle 1
12 Tank Cap 1 27B 1/8" Nozzle 1
13 Joint Pipe 1 27C 7/64" Nozzle 1
14 Intake Manifold 1 27D 3/32" Nozzle 1
15 Pressure Gauge 1 28 Nozzle Cap Nut 1
16 3/8" Nipple Connector 5 29 Funnel 1
17 Water Trap 1 30 Hood 1
18 3/8" Brass Air Supply Valve 1 31 Washer 1
18A 3/8" Brass Throttling Valve 1 32 Instruction Manual 1
MAINTENANCE
1. Pay particular attention to the SAND HOSE (#24), the NOZZLE SHUT OFF VALVE (#18C),
and the NOZZLES (#27A-D) as they will wear out much more quickly than the other
pieces.
2. The SAND HOSE needs replacing when it’s side walls develop leaks or show blisters in
the surface. Do not use if any of these problems are present.
PARTS LIST
* Note: Left Handle is #6-L, Right Handle is #6-R.
REV 01/01Page #13 -- SKU 34202
To Next Page
Loading...
