The CENTURION system is designed to be maintenance free. However, there are some basic checks that
should be carried out regularly (every six months) which will increase the long term reliability of the
system, and prevent false triggering of the protection systems leading to erratic operation of the gate.
IMPORTANT: ISOLATE MAINS SUPPLY TO SYSTEM BEFORE CLEANING OR WORKING ON THE
EQUIPMENT. (NB: The battery driven operators will continue to operate due to the internal battery)
1. Remove all shrubs and vegetation which may
interfere with the motors or linkages.
2. Keep the inside of the motors and control
housings clear of insects and dirt.
3. Grease the gate hinges to ensure that the gate
swings freely.
4. Check that the padlocks can be opened. Apply
oil or grease to the padlocks, particularly during
the rainy seasons.
Basic MaintenanceBasic MaintenanceBasic Maintenance
Page 16
To Next Page
Loading...
