16-19
2
2
2
3
4
5
6
6
8
9
9
11
12
13
14
16
16
17
17
18
18
18
18
18
INFORMATION MESSAGES
N° Programmer message Description
1 Card not found please check card insertion The programmer is connected without SD card
2 Card error please check card The SD card is damaged
3 File not found The file selected is not stored on the SD card
4 Please key OFF and ON before program
this board
The machine needs to be reset with the key
5 Wrong device connected The programmer wiring is connected to the wrong
card
6 Please check device connection and power
error code XXX
Either the card to be updated is not powered or it is
not on the CAN-BUS
7 Reset failed please key OFF and ON Automatic truck reset failed
8 Clear eeprom failed repeat operation Restoring default parameters failed, repeat the
download operation
9 Program failed repeat operation Download operation failed, repeat procedure
10 Please key OFF twice Reset default parameters and truck serial number
11 Attention no file available On the SD card there is no file for the card selected
12 Attention XXX is waiting for program
program it before
Wrong card for this software, connect to the correct
card
13 Attention XXX is waiting for program Wrong card for this software, connect to the correct
card
14 Attention via CAN program type not
possible please use serial
Programming by CAN-BUS not possible, use
SERIAL mode
15 Card full please erase file Memory full, delete one file for the truck connected
(SAVE/RESTORE menu)
16 Please check device connection and power
error while setting profile
Check the CAN-BUS of the programmer and of the
truck
17 Please check device connection and power
error while setting LPH
Check the CAN-BUS of the programmer and of the
truck
18 Profile already exist The file of this profile already exists in the SAVE/
RESTORE menu
19 Auto recognition failed save restore not
possible
The programmer does not recognize the truck, try
MANUAL mode
20 Attention origin and present The truck has a different software version from the
file of origin
21 Parameter file saved with this truck serial
number has different software version
The file stored with this serial number has different
software versions. Delete the old file
https://www.forkliftpdfmanuals.com/
To Next Page
