CESSNA AIRCRAFT COMPANY FOR TRAINING USE ONLY
MODEL 152 9-51
SECTION 4 – NORMAL PROCEDURES
TO RECEIVE GLIDE SLOPE SIGNALS:
1. NAV Frequency Select Knobs – SELECT desired localizer frequency (glide slope frequency is
automatically selected).
2. NAV/COM VOX-ID-T Switch – SELECT ID position to disconnect filter from audio circuit.
3. NAV VOL Control – ADJUST to desired listening level to confirm proper localizer station.
CAUTION
When glide slope “OFF” or “GS” flag is visible, glide slope indications are
unusable.
SECTION 5 – PERFORMANCE
There is no change to the airplane performance when this avionic equipment is installed.
To Next Page
Loading...
