101
4
5
• Install the steel screen and a lter element. Apply a layer
of lubricating oil on the inner diameter of air lter rubber
sealing ring�
• Install air filter cover and clamps. Ensure the filter is
installed correctly and completely sealed�
NOTE
The air filter must be checked and replaced more often if
the machine is operated in extremely dusty areas or if it
becomes wet. Each time air lter maintenance is performed,
check the air inlet to the air lter box for obstructions, the
ttings of the air lter housing rubber joint, throttle body,
and manifold for an airtight seal. Check that all ttings are
tightened securely to avoid the possibility of unltered air
entering the engine�
CAUTION
Do not start engine without air filter element. Non-filtered
air will enter into the engine and cause engine wearing and
damage. In addition, driving without air lter will also decrease
performance and cause engine overheating.
To Next Page
Loading...
