CF MOTO CFORCE 110 - Spark Arrestor

104
Spark Arrestor
Clean the spark plug arrestor when the mu󰀪er and exhaust pipe is at a normal temperature.
• Remove nuts
(
1
);
• Remove the spark arrestor
(
2
);
• Tap the exhaust pipe gently and use a steel brush to clean any carbon deposits from the spark
arrestor;
• Install the mu󰀪er in the exhaust pipe;
• Install nuts.
WARNING
When cleaning the spark arrestor: please make sure the exhaust pipe is totally cooled before you touch
its parts. Do not start the engine when cleaning the exhaust system.
1
2