CF MOTO CFORCE 110 - Battery Storage

CLEANING & STORAGE
125
Battery Storage
Remove the battery from the vehicle and ensure that it is fully charged before placing it in storage. Protect
the battery from freezing temperatures, which can damage the battery.
Lubrication
Inspect all cables and lubricate them with cable lubricant according to instructions. Add all-season grease
onto the vehicle’s lubricating points.
‘Fog’ the Engine
• Remove the left cover to inspect the spark plug(s).
• Remove the spark plug(s), rotate the piston to the bottom of its stroke, and pour approximately 2 oz.
(15mL ~ 20mL) SAE 10W-40/SG engine oil into the opening.
NOTE
Be careful! If you miss the spark plug hole, oil will drain out from the spark plug cavity, and an oil leak may
occur. To access the spark plug hole, use a section of a clean hose and a small plastic squeeze bottle lled
with a measured amount of oil.
• Reinstall the spark plug( s ). Torque the spark plug to specications.
• Turn engine over several times slowly. Oil will be forced into and around the piston, and piston rings
and the cylinder will be coated with a protective lm of fresh oil.
• Reinstall the spark plug(s), cap(s), and the side panel.
NOTE
Starting the engine during the 󰀬orage period will di󰀬urb the protective lm created by fogging. Corrosion
could occur. Never 󰀬art the engine during the 󰀬orage period.