CF MOTO CFORCE 110 - Front and Rear Shock Absorber

MAINTENANCE & LUBRICATION
120
Front and Rear Shock Absorber
Standard Shock Absorber
The spring preload can be adjusted to suit the rider’s weight and
riding conditions�
Adjust the spring preload as follows:
To decrease the spring preload by turning the adjusting ring
2
in direction
A
�
To increase the spring preload by turning the adjusting ring
2
in direction
B
�
NOTE
A special spanner wrench (if not supplied in tool kit, please
contact your dealer.) is used to make this adjustment.
Standard preload position: Position #3
A- Minimum (soft).
B- Maximum (hard).
NOTE
Always adjust shock absorbers to be the same setting for both
left and right sides.
2
B
A