MAINTENANCE & LUBRICATION
110
Foot Brake Pedal Height Adjustment
The top of the brake pedal should be positioned 60 mm ~ 70
mm above the top of the footrest. If it is beyond the specication,
contact your dealer to adjust it.
DANGER
Following the requirements:
• Make sure the brakes operate smoothly and that the free
play is correct�
• Make sure the brakes do not drag.
• Replacement of brake components requires professional
knowledge. These procedures should be performed by
your dealer.
Foot Brake Light Switch
Check the switch assembly or cable to see if they are properly
xed in case of brake light failure. If the brake light still does not
work normally, please contact your CFMOTO dealer.
Cable Inspection and Lubrication
WARNING
Inspect cables frequently and replace if damaged
Lubricate inner cable and cable terminals. If a cable cannot be
operated smoothly, contact your dealer for replacement.
To Next Page
Loading...
