FEATURES & CONTROLS
56
Electronic Fence Operation
The functions can be only used inside the available range of the receiver and vehicle�
Range Radius: 0~1312ft (0m ~ 400 m)�
Turning on:
Turning on the receiver by long press ON/OFF for 1 second. The receiver's buttons can then be used.
Turning o:
If the receiver is turned on or the vehicle is connected to APP by Bluetooth, and there is no operation for
30 seconds, the receiver will be turned o automatically; Or by long pressing the OFF to shut down the
receiver�
Unlocking the vehicle:
Long press ON for 3 seconds to unlock the vehicle, the receiver will vibrate once, the indicator will ash
in blue twice, and the alert will sound once; If the vehicle drives out the set range, the receiver will vibrate
three times�
Locking the vehicle:
Press OFF for three times within 2 seconds to lock the vehicle, and the receiver will vibrate once, the
indicator will ash in blue twice and the alert will sound once.
Setting the electronic fence center
After turning on the receiver, set the vehicle's current location as a center by pressing ON and OFF at the
same time, and the receiver will vibrate once, the indicator will ash in blue twice, and the alert will sound
once
NOTE:
By default, the receiver is o, so please set the range in the APP.
Operators cannot drive the vehicle while the range is being set.
If the receiver does not locate successfully, the electronic fence is turned o.
To Next Page
Loading...
