OPERATOR SAFETY
16
Safety Training
When you purchased your new ATV, your dealer offered a hands-on safety training course that covers
all aspects of vehicle safety. You were also provided with printed materials that explain safe operating
procedures. You should review this information on a regular basis. If you purchased a used ATV from a
party other than a dealer, you can request safety training from any authorized dealer.
DANGER
Serious injury or death may occur if you do not follow the following instructions and procedures outlined in
this owner’s manual:
• Read this manual and all decals carefully, and follow the operating procedures described.
• Never operate an ATV without proper instructions. Take a training course. Beginners should receive
training from a certied instructor. Contact an authorized dealer nearest you to nd out about the
training courses.
• Never permit a guest to operate the ATV unless the guest has read this manual, all product labels,
and has completed a certied safety training course.
• Never operate an ATV without wearing an approved helmet that fits properly. Always wear eye
protection (goggles or face shield), gloves, boots, a long-sleeved shirt or jacket, and long pants.
• Never consume alcohol or drugs before or while operating an ATV.
• Never operate an ATV at excessive speeds. Travel at speeds appropriate for the terrain, visibility
and operating conditions, and your experience.
• Never try wheelies, jumps or other stunts.
• Always inspect your ATV before each-time use to make sure it’s in safe operating condition.
• Always follow the inspection and maintenance procedures and schedules outlined in owner’s
manual.
To Next Page
Loading...
