OPERATOR SAFETY
17
• Always keep both hands on the handlebars and both feet on the footrest of the ATV during
operation�
• Always travel slowly and use extra caution when operating on unfamiliar terrains. Be alert to terrain
conditions�
• Never operate on excessively rough, slippery, or loose terrains.
• Always follow proper turning procedures as described in this manual. Practice turnings at low
speeds before attempting to turn at faster speeds. Do not turn at excessive speeds.
• Always have the ATV inspected by an authorized dealer if it’s been involved in an accident.
• Never operate on hills too steep for the ATV or for your abilities. Practice on smaller hills before
attempting larger hills�
• Always follow proper procedures for climbing hills. Check the terrain carefully before ascending a
hill�
• Always follow proper procedures for climbing hills. Check the terrain carefully before ascending a
hill�
• Always follow proper procedures for climbing hills. Check the terrain carefully before ascending a
hill�
• Never go over the top of a hill at high speeds.
• Always follow proper procedures for going downhill and for braking on hills. Check the terrain
carefully before you start down a hill. Shift your weight backward. Never go down a hill at high
speeds. Avoid going down a hill at an angle, which would cause the vehicle to lean sharply to one
side. Travel straight down the hill when possible.
• Always follow proper procedures for crossing the side of a hill. Avoid hills with excessively slippery
or loose surfaces. Shift your weight to the uphill side of the ATV. Never attempt to turn the ATV
around on any hill until you’ve mastered (on level ground) the turning technique outlined in this
manual. Avoid crossing the side of a steep hill when possible.
To Next Page
Loading...
