103
Measure the electrode gap with a thickness gauge, and if
necessary, adjust the gap to specication.
NOTE: Spark plug gap
a
:
0.6 mm ~ 0.7 mm 0.6 mm ~ 0.7 mm
Installation
1� Clean the gasket surface. Wipe off any grime from the
threads�
2� Install spark plug and tighten to specied torque.
NOTE: Spark Plug Torque: 8�8 ft-lb� (12 N
•
m)
If a torque wrench is not available when you are installing a
spark plug, a good estimate of the correct torque is 1/4 to 1/2
turn past finger tight. Have the spark plug tightened to the
specied torque as soon as possible.
a
To Next Page
Loading...
