FEATURES & CONTROLS
46
4
Horn Button
Press the start switch to start the vehicle�
5
Safety Lock and Safety Lanyard
For the vehicle to operate, the end of the safety lanyard must
be connected on the safety lock seat as shown. The other
end of the safety lanyard should be connected to a part of the
operator’s body that is higher than the hand position.
If an accident causes the driver to fall from the vehicle, the
safety lanyard will disconnect from the safety lock seat and
vehicle power shuts o at once.
When powering the vehicle, verify the safety lanyard is
completely fitted well on the safety lock seat. The vehicle will
not operate without the safety lanyard installed.
If the safety lanyard is lost, please contact your CFMOTO dealer
to purchase a new one.
5
4
To Next Page
Loading...
