Chapter 4
Donning and Doffing
110 SAFETY FIRST Edition 1 – December 2019
MSA G1 Electronic Breathing Apparatus
Step Description Illustration
3.5 Remove the left arm out of the shoulder
strap.
3.6 Remove neck strap from around neck
Decontaminate BA on site if required.
If the BA does not need to be decontaminated on site, make sure it is
identified so that it can be recommissioned back at the station or training
ground.
Doff the Flash Hood
Follow these steps to doff the flash hood.
Step Description Illustration
1 Follow the
Doffing BA
procedure to step 1.4 in chapter 4
2 Remove the facemask and the BA.
2.1 At the temple, slide the fingers under the
flash hood.
2.2 Slide the face opening back over the head so
that it is sitting over the jacket collar.
To Next Page
Loading...