Chapter 5
After-use Care and Maintenance
126 SAFETY FIRST Edition 1 – December 2019
MSA G1 Electronic Breathing Apparatus
Safety considerations
••••••••••••••••# •••••••••••••••••
Wear safety goggles and chemical resistant gloves to handle
BioGuard®, especially when agitating in the solution. Avoid splashing
the solution during cleaning and rinsing.
Clean up any spills. Keep out of eyes and mouth. Avoid skin contact.
Eyes: If contact with eyes occurs, immediately flush eyes with cold
running water for at least 15 minutes. Seek medical attention.
Skin: If skin contact occurs, immediately flush skin with water for at
least 15 minutes while removing contaminated clothing. Seek
medical attention if symptoms persist.
Ingestion: If swallowed, contact a doctor or Poisons Information
Centre on 131 126.
Non-approved heat drying equipment is
not
to be used for facemask
drying under any circumstances.
Do not dry the facemask by placing it in direct sunlight.
Facemask drying in an approved cabinet should
not exceed 50°C
.
To Next Page
Loading...