Chainway C3000 - Appendix 1 Code Types of 1 D Barcode Scanner; A1.1 Supported Code Types; A1.2 Transmit Code Type Character

Appendix 1 Code Types of 1D Barcode Scanner
The 1D barcode scanner can set parameters by scanning specific Function Barcodes.
Operation Steps: aim the scanner at a function barcode; scan it; the laser will quickly disappear if succeed,
which shows that setting is successful.
A1.1 Supported Code Types
Appendix Table 1
Enable
Disable
Code 39
Codabar
IATA 2 of 5
Code 128
Discrete 2 of 5
UPC A with 2 Supps.
Interleaved 2 of 5
Code 93
UPC A with 5 Supps.
UPC A
MSI
UPC E0
EAN 8
Trioptic Code 39
UPC E0 with 2 Supps.
EAN 13
Bookland EAN
UPC E0 with 5 Supps.
EAN 128
Code 11
EAC 13 with 2 Supps.
UPC E
Chinese 2 of 5
EAN 13 with 5 Supps.
ISBT 128
UPC E1
UPC E1 with 2 Supps.
RSS-Limited
UPC E1 with 5 Supps.
RSS-14
Coupon Code
RSS-Expanded
Note: the types enable / disable by default can be switched by scanning corresponding function barcodes in
Appendix Table 2.
A1.2 Transmit Code Type Character
Enable Disable
If this function is enabled, scanner will recognize code type when scanning a barcode.