35
Dual Gate Settings
NOTE: We recommend that all accessories and board configurations are set on the primary operator.
Main Control Board
FEATURE PRIMARY OPERATOR SECONDARY OPERATOR
Timer-to-Close Set the TTC dial to desired setting OFF
Bi-Part Delay Switch Bi-Part Delay: ON (will open last and close first)
Tandem Mode: OFF
Bi-Part Delay: OFF (will open first and close last)
Tandem Mode: OFF
ACCESSORY PRIMARY OPERATOR SECONDARY OPERATOR
Remote Controls Program remote controls 1 to 50 to the primary
operator.
Program remote controls 51 to 100 to the secondary
operator
LiftMaster Internet Gateway Program to primary operator.
Garage and Gate Monitor Program to primary operator.
Expansion Board
FEATURE PRIMARY OPERATOR SECONDARY OPERATOR
QUICK CLOSE Switch ON OFF
ANTI-TAIL Switch ON OFF
SETTINGS
To Next Page
Loading...
