Chamberlain Swing GATE - Loop Detector

48 of 53 Doc 6001242 (01-20273) Rev C
CONNECTORS
LIMIT SWITCH (J4) Connector for the left/right limit switch cable.
BATTERY I/O (J11) Connector for use by the Power Fail Operation unit.
PWR INPUT (J1) Connector for AC input power.
MOTOR POWER (J3) Connector for the motor cable.
LOOP DETECTOR Connector for optional LiftMaster Outside Interrupt Loop detector
(J15) add-on board.
LOOP DETECTOR Connector for optional LiftMaster Inside Interrupt Loop detector add-
(J12) on board.
LOOP DETECTOR Connector for optional LiftMaster Shadow Loop detector add-on
(J13) board.
LOOP DETECTOR Connector for optional LiftMaster Exit Loop detector add-on board.
(J14)