Bluetooth Password (btPP)
Press the Menu/Enter Button. The Next display shown is the Bluetooth Password (btPP). When shown, this num-
ber will flash between “btPP” and a four digit code.
The code is used for accessing the Legacy View app. The default is “1234” and unless it has been changed, no
password will be needed to access the control valve with Legacy View.
Display Off (do 0)
Press the Menu/Enter Button. The next display shown is the Display Off feature (d o 0). This is defaulted to off (0)
but can be turned on by pressing the Set/Change button twice to turn it on (1)
Activating this feature will turn the display off when not in use. This does not shut the system off, just what is
27
To Next Page
Loading...