6.
SEWING
6.
"
Attach
all
devices bofor:1
rnachir18. If the rnachine is used vvlthout these devices
attached, injury rnay result.
"
Turn off the
powe;
switch
at the
times. The
motor
will
turning evon
after
the; pnvver
is
sv\'itchcd
off
JS
a result
of
the
motor's
inertia.
Wait
until the rnmor
slops
fully before
rnayoperate if the treadle is
When
threading the needle
by mistake,
which
could
msult
in injury.
When
replacing the needle and bobbin
When
not
using the machine and
when
leaving
the
machine unattended
vvork. The rnachine
• Do
not
touch any
of
the
moving
parts
or
place any objects against
the
machine
while
sewing,
as
this may
personal
injury
or
damage
to
the
machine.
6~1.
Sewing
Lower thread
6~2.
Backtacking
-12-
1.
While
holding
the
upper thread
with
your
fingers, turn
the machine
pulley by hand
toward
you
until the
lower
thread
comes
out
onto
the
feed
dog.
2.
Pull the
lower
thread
toward
you
and check
that
it
pulls
out
smoothly,
3. Turn on
the
power
switch.
4. Depress the treadle
to
start
sewing,
When
the reverse lever
is pushed,
the
material
feed
direction
will
be reversed, and
when
it
is returned
to
its
original position,
the
feed
direction
will
change back
to
normal.
From the library of: Superior Sewing Machine & Supply LLC
To Next Page
Loading...
Need help?
General
