Charles RT115 Tier 3 - Page 213

RT115 Tier 3 - SERVICE 213
AS NEEDED
RT115 Tier 3 - SERVICE 213
AS NEEDED
Operator Alert Indicator
When a non-critical engine fault
occurs, the operator alert indicator
on the gauge cluster will light. A
fault code will be stored in the
diagnostic gauge.
Engine Shutdown
Indicator
When an critical engine fault
occurs, the engine shutdown
indicator will light. A fault code will
be stored in the diagnostic gauge,
and the engine will shut down
within 30 seconds.
Tachometer/Hourmeter/
Diagnostic Gauge
To display codes:
1. Press the selection switch to
scroll through the gauge
parameters until FMI SPN
code is displayed.
2. Press the selection switch to
scroll through all codes.
Operator Alert Indicator
When a non-critical engine fault
occurs, the operator alert indicator
on the gauge cluster will light. A
fault code will be stored in the
diagnostic gauge.
Engine Shutdown
Indicator
When an critical engine fault
occurs, the engine shutdown
indicator will light. A fault code will
be stored in the diagnostic gauge,
and the engine will shut down
within 30 seconds.
Tachometer/Hourmeter/
Diagnostic Gauge
To display codes:
1. Press the selection switch to
scroll through the gauge
parameters until FMI SPN
code is displayed.
2. Press the selection switch to
scroll through all codes.