Charles RT115 Tier 3 - Page 214

RT115 Tier 3- SERVICE
AS NEEDED
214 RT115 Tier 3 - SERVICE
AS NEEDED
To clear active codes:
1. Turn ignition switch to STOP.
2. Turn ignition switch back to START.
To change display options:
1. Turn the ignition switch to STOP.
2. Press and hold the selection switch.
3. Turn the ignition switch to ON.
4. Press and hold the selection switch to scroll through display
options.
5. Release the switch to stop scrolling.
6. To turn options off or on, press the selection switch twice.
7. To save changes, continue scrolling until EXIT CFG is
displayed, then press and hold.
To clear active codes:
1. Turn ignition switch to STOP.
2. Turn ignition switch back to START.
To change display options:
1. Turn the ignition switch to STOP.
2. Press and hold the selection switch.
3. Turn the ignition switch to ON.
4. Press and hold the selection switch to scroll through display
options.
5. Release the switch to stop scrolling.
6. To turn options off or on, press the selection switch twice.
7. To save changes, continue scrolling until EXIT CFG is
displayed, then press and hold.