12885791. If PN: 11864171 was ordered, it will not come with a bracket. Please skip to Section 2 for
Battery Backup Installation Instructions.
1.1.
Disconnect main power cord.
1.2.
Disconnect LN2 supply.
1.3.
Use the 10-32 screws to install the bracket to the freezer on the plumbing stack cover. Please
reference Figure 4 and 5 for an example of the Vario Freezer Plumbing Stack Cover.
Figure 4 - Vario Screw Location on the Plumbing Stack Cover
INSTALLATION INSTRUCTIONS - HEco Series, Cabinet Series, and MVE Series (Open Top
Freezers)
2. Installing the Battery Backup Follow these instructions for the HEco Series, Cabinet Series, and MVE
Series (Open Tops). These are instructions for mounting the Battery Backup either to the bracket
previously installed in Section 1 using PN: 12885791 or to the freezer itself if PN: 11864171 was
ordered.
To Next Page
Loading...
