TEC 3000 Operating and Maintenance Freezer Manual
7.2.6.2.
Global Password Change
This section describes how to change the Global Password 3 4 5 6. The Global
Password has Security Level 4 clearance.
1. Press “SETUP”
Controller will prompt for a password. A flashing cursor
on the entry screen will make it clear which digit is being
changed. Use the “▲/▼” keys to scroll to the
appropriate number. Press “ENTER” to advance the
cursor to the next position.
2. Press “ENTER”
The display will read “Temperature Menus”.
3. Press “SETUP”
Until the display reads “Password Menus”.
4. Press “ENTER”
The display will read “Password Entry Mode”.
5. Press “SETUP”
The display will read “Change Global Password”. The
Global Password has Security Level 4 clearance.
6. Press “ENTER”
The display will read “Global Password”. Use the “▲/▼”
keys to input new Global Password and press “ENTER”
to advance the cursor.
7. Press “ENTER”
The display will read “Confirm new Password?” To
confirm new password, use the “▲/▼” keys to change
from “NO” to “YES” and press “ENTER” to save.
Higher User Level
Required use ▲▼ to
ENTER Password
0000
Press ENTER for
Temperature Menus
or press SETUP for
next menu
Press ENTER for
Password menus or
press SETUP for
next menu
Password Entry Mode
ENABLED
Use ▲▼ to adjust
Press ENTER to save
Press ENTER to
Change global
Password or press
SETUP for next
Global Password
Use ▲▼ to adjust
Press ENTER for next
XXXX
Confirm new
Password?
NO
Use ▲▼ to adjust
To Next Page
Loading...
