EN
27
Timer
The timer is adjustable to minutes or unlimited.
Remote Control
Hand Switch Active regimen starts with closed contact.
Low Voltage Indication
• Indicator Threshold: . Volts (typical)
• Shutdown Voltage: . Volts (typical) . Volt
Minimum
*These voltages may be tested under NO load condition.
Physical Characteristics
• Size: .” (.cm) x .” (.cm) c .” (.)
• Weight (with batteries): . grams
Environmental Conditions
• Operational Temperature: ° C to ° C
• Humidity (Maximum): % - % RH
• Transport & Storage: Store in Dry, Cool Place
° C to ° C
• Pressure: - kPA
EN - Classification
Type BF Applied Part
• Internally powered only
• Ordinary protection ingress of liquids
• Continuous operation
• Not suitable for use in the presence of a
flammable anesthetic mixture with air or with
oxygen or nitrous oxide.
Guidance and Manufacturer’s Declaration–
Electromagnetic Emissions
The Chattanooga Continuum is intended for use in the
electromagnetic environment specified in the table below.
The user of the Chattanooga Continuum should assure
that it is used in such an environment.
Emission Tests Compliance
Electromagnetic Environment -
Guidance
RF emissions
CISPR 11
Group 1
The Chattanooga Continuum uses RF
energy only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference in nearby electronic
equipment
RF emissions
CISPR 11
Class B
The Chattanooga Continuumt is
suitable for use in all establishments,
including domestic establishments
and those directly connected to the
public low-voltage power supply
network that supplies buildings used
for domestic purposes.
Harmonic
emissions
IEC 61000-3-2
N/A - Battery
Operated Device
Voltage
fluctuations/
Flicker Emissions
IEC 61000-3-3
N/A - Battery
Operated Device
To Next Page
Loading...
