Chauvet DMX-55 DMX User Manual

Operating Instructions
DMX-55 User Manual 12 2006-01-11 11:59:07
COPY SCANNER SETTINGS
This operation allows the user to copy the programming state of one scanner to another. This is
especially useful when both scanners are of the same type.
Action 
1) Hold and maintain the Scanner button
to copy.
2) Tap another Scanner button to copy
settings into.
Notes 
COPY SCENE
Action 
1) Press the Program button until the LED
blinks.
2) Use  BANK and  BANK buttons to
change banks.
3) Tap the scene to copy within the bank.
4) Use  BANK and  BANK buttons to
change to another bank if desired.
5) Tap MIDI/Rec button.
6) Tap the SCENES button you wish to
copy the scene to.
Notes 
DELETE SCENE
Action 
1) Press the Program button until the LED
blinks.
2) Use  BANK and  BANK buttons to
change banks.
3) Tap the scene to delete.
4) Press and hold the Auto/Del button and
tap the scene button you wish to delete.
Notes 
All DMX channels for the deleted scene will be set to
0.
DELETE ALL SCENES
Action 
1) Power off the controller.
2) Press and hold the Program and BANK
buttons while turning the power back
on.
Notes 
COPY BANK
Action 
1) Press the Program button until the LED
blinks.
2) Use
 BANK and  BANK buttons to
select the bank to copy.
Notes 

Chauvet DMX-55 DMX Specifications

Power

operating range	DC 9V-12V 500mA min
adapter	Provided

Operating Environment

maximum ambient temperature	45°C (113° F)

Weight and Dimensions

length	514 mm (20.25 in)
width	89 mm (3.5 in)
height	171 mm (6.75 in)
weight	2.7 Kg (6 lbs)