CHCNAV i73 Plus - 2.5 Connecting to an Office Computer; 2.6 Connecting to a Controller

Getting Started with i73+
CHCNAV i73+ GNSS USER GUIDE | 2022-3 P a g e | 17
2.5 Connecting to an Office Computer
The receiver can be connected to an office computer via a HCE320 USB Type-C. Before you
connect to the office computer, ensure that the receiver is powered on.
The following figure shows how to connect to the computer for serial data transfer or
settings:
2.6 Connecting to a Controller
2.6.1 Connecting via Wi-Fi with LandStar 7 Software
Turn on the controller → run LandStar 7 → go to Config main menu → tap Connect.
In the Connect screen, select CHC for the Manufacture field, i73+ for Device Type field, WIFI
for Connection Type field.
USB Type-C