Configuring Through a Web Browser
CHCNAV i73+ GNSS USER GUIDE | 2022-3 P a g e | 68
Notes
• It may take about 3 or 4 minutes to complete the firmware upgrading. Do not touch
the power button or unplug the power until the upgrading process finishes, or
damage will be caused to the receiver.
• The receiver will restart after the firmware upgrading is done, so users need to
reconnect the receiver with your computer via Wi-Fi, and then log-in the receiver
through a web browser to continue the configuration.
5.7.7 GNSS Board Upgrade Submenu
Use this submenu to upgrade GNSS Board. Use this submenu to load new board to the
receiver across the network. Tap the Browse button to locate the upgrade file → tap Confirm
button to confirm the selected upgrading file and start upgrading.
To Next Page
Loading...
