CHCNAV i73 Plus - 3.2 Real-Time Rover Station Setup

Equipment Setup and Operation
CHCNAV i73+ GNSS USER GUIDE | 2022-3 P a g e | 28
3.2 Real-Time Rover Station Setup
For good performance, the following rover station setup guidelines are recommended:
Components
Steps:
(1) Connect the UHF whip antenna to the receiver.
(2) Screw the receiver onto the pole.
(3) Turn on the receiver by pressing the power button for 3 s.
(4) Switch on the data controller and connect it to the receiver.
(5) Use software to configure the receiver as rover mode.
(6) Center and level the receiver more precisely.
(7) Use software to start survey.
No.
Name
a
i73+ GNSS receiver
b
UHF whip antenna
c
2M range pole w/bag
a
b
c