Getting Started with i73+
CHCNAV i73+ GNSS USER GUIDE | 2022-3 P a g e | 22
2.7 Downloading Logged Data
Data logging involves the collection of GNSS measurement data over a period at a static
point or points, and subsequent post-processing of the information to accurately compute
baseline information. Data logging using receivers requires access to suitable GNSS post-
processing software such as the CHC Geomatics Office (CGO) Software.
2.7.1 FTP Download
The procedures of downloading logged data through FTP are as follows:
(1) Switch on the receiver, search its Wi-Fi in the computer and connect.
(2) After the successful connection, open the file manager in the computer and input
“ftp:\\192.168.1.1” in the address box.
(3) Input user name and password, the default user name and password are “ftp”.
(4) Double click the folder “repo_receiver SN” (take 3225804 as example), you will see 9
folders. The “push_log” folder is used to save the log files, and the other 8 folders represent
different logging sessions and are used for store static data.
To Next Page
Loading...
