Configuring Through a Web Browser
CHCNAV i73+ GNSS USER GUIDE | 2022-3 P a g e | 57
2. TCP/UDP_Client/NTRIP Server
Tap the Connect button on the right of required TCP/UDP Client → the IO Settings screen will
appear → select the connection protocol from TCP, UDP,NTRIP1.0 and NTRIP2.0 → enter the
IP and Port of the target server → configure messages that you want to output to the target
server → click to save and complete the connection.
➢ Connection Protocol: TCP
To Next Page
Loading...
