CHCNAV i83 - Connecting to a Controller; Connecting Via Wi-Fi with Landstar 7 Software

Getting Started with i83
CHCNAV i83 GNSS USER GUIDE
| 2022-01
P a g e | 20
2.7 Connecting to a Controller
2.7.1 Connecting via Wi-Fi with LandStar 7 Software
Turn on the controller → run LandStar 7 → go to Config main menu → tapConnect.
In the Connect screen, select CHC for the Manufacture field, i83 for Device Type field, WIFI for
Connection Type field.
Tap the Wireless Lan icon on the right side to select the hot spot → Switch on the WiFi module
by the top switch → select the target device in thelist.