CHCNAV i83 - Getting Started with I83; About the Receiver; Parts of the Receiver

Getting Started with i83
CHCNAV i83 GNSS USER GUIDE
| 2022-01
P a g e |
8
2 Getting Started with i83
2.1 About the Receiver
The new CHCNAV i83 GNSS receiver offers integrated IMU-RTK technology to provide a robust
and accurate GNSS positioning in any circumstances. Unlike the standard MEMS based GNSS
receivers, the i83 GNSS IMU-RTK combines state-of-the-art GNSS RTK engine, calibration-free
professional IMU sensor and advanced GNSS tracking capabilities. Survey projects are
achieved with high productivity and reliability pushing the boundaries of conventional GNSS
RTK survey.
The LCD panel enables user to check satellite-tracking status, internal battery status, Wi-Fi
status, working mode, data logging status and basic receiver information. Bluetooth and Wi-Fi
technology provides cable-free communication between the receiver andcontroller.
The receiver can be used as the part of an RTK GNSS system with CHCNAV LansStar7
software. Moreover, user can download the GNSS data that recorded in the internal memory
of receiver to a computer.
The receiver can be used as the part of an RTK GNSS system with CHCNAV LandStar 7
software. And you can download the GNSS data that recorded in the internal memory of
receiver to a computer.
To configure the receiver for performing a wide variety of functions, you can use the web
interface by connecting the receiver with PC or smartphone through Wi-Fi.
2.2 Parts of the Receiver
The operating controls are all located on the front panel. SIM card slot is on the backside. Serial
ports and connectors are located on the bottom of the unit.