6000 and 7000 Appliances Installing and Removing Memory
6000 and 7000 Appliances Replacing Memory|22
If necessary, pull one end of the DIMM, then the other, to gradually release it from the
contact pins.
Important - Make sure that there are no leftover parts inside the appliance.
5.
Make sure the DIMMs are installed correctly.
a.
Replace the appliance cover without tightening the appliance cover screws.
b.
Connect the power cords to the appliance.
The appliance turns on. This may take a few minutes.
6.
Tighten the appliance cover screws to secure the cover on the appliance.
To Next Page
Loading...
