Chenbro ES34069 - Page 17

www.chenbro.com
17
ES34069 Chassis User’s Manual Rev. A1
d. Slim ODD cable connection
e. Cable management
1 2
■ Use power split cable in accessory pack for conversion
of DC harness, small 4P is connected to the Slim
ODD adaptor board
■ Use either standard IDE / SATA cable from 3
rd
party
M/B, or use optional cable from Chenbro to connect
to the Slim ODD adaptor board
1 2
■ Due to limited space inside the chassis, make sure all
cable are connected properly and use the cable tie
through the bridge land on side wall
■ Tie up the cable so the cables are fixed in certain
space.