Chenbro ES34069 - Side Panel Removal; Front Bezel Removal

www.chenbro.com
8
ES34069 Chassis User’s Manual Rev. A1
To open the chassis for assembly of internal parts, users need to:
z Remove the side panel
z Remove the front bezel
Side Panel Removal
Front Bezel Removal
1 2
1 2
■ Release the side panel thumb screw on the rear
■ Push and slide the side panel toward rear to open the
chassis
3 4
■ Lift up the latch along the side to detach the bezel ■ Detach the bezel from Slim ODD side gently
■ Angle the latch until it is 15 degree away from the
chassis
■ gently pull the bezel to make it detach