Chenbro ES34069 - Connecting Front Panel I;O and LEDs

www.chenbro.com
16
ES34069 Chassis User’s Manual Rev. A1
Connecting Front Panel I/O and LEDs
a. USB 2.0 cable connection
b. Front display cable connection
c. Card reader cable connection
1
1 2
1
■ Front USB cable should be connected to on-board USB
header properly depends on different M/B.
■ The fan-out cable with different connection for:
Power on, HDD, LAN, FAIL and the front switch
■ Connect to the M/B according to the M/B pin header
definition properly.
■ After installing the assembled Card Reader, the
shorter USB cable should be connected to the M/B