42 Cheyenne HAWK, HAWK SPIRIT & HAWK THUNDER
The safety cartridge fixes the pro-
tective sleeve (1) and simultaneously
seals the opening.
In order to fit the protective sleeve (2) on
the connection cable and drive:
E If already inserted: Remove thecon-
necting cable from thetattooing ma-
chine.
E Cut o a section of protective sleeve
of an appropriate length.
E Slide this section of protective sleeve
completely over the connecting cable.
E Connect the connection cable (see
thenext chapter).
E Pull the end of the protective hose
(2) completely over your tattooing
machine.
E Ensure that the two protective
sleeves overlap. For instance, fix
them with a rubber band or adhesive
film.
5.4 Connecting the power unit
CAUTION
Risk of short circuits and risk of mild
electric shocks
If cable or cable connection is visibly
damaged, there is a risk of electric
shock and damage to the electronics.
E Perform a visual inspection of your
tattooing machine and the cable for
signs of damage, e.g. a defective
cable connection.
E Never bend the connecting cable
while in operation.
E Observe the operating instructions
for the particular power unit.
CAUTION
Cables constitute a trip hazard
People can stumble over inappropriately
routed cables and get injured.
E Route all cables so that no-one can
stumble over them or pull them
accidentally.
1
3 2
To Next Page
Loading...
