Cheyenne HAWK - Using the Tattooing Machine; Setting the Needle Protrusion

45
Cheyenne HAWK, HAWK SPIRIT & HAWK THUNDER
E If you detect anything unusual,
refer to chapters “10 For questions
or problems” and “11.1 Warranty
declaration” on page50.
E If your tattooing machine is no longer
operating safely, take it out of service
and consult your local specialist re-
tailer.
6 Using the tattooing machine
6.1 Setting the needle protrusion
CAUTION
Risk of injury from excessive
protrusion of needle
A large needle protrusion permits a
deep piercing depth. If needle protru-
sion and piercing depth are excessive,
this can damage the subcutaneous
layer.
E Start with just a short length
ofneedle protruding.
E Switch on the power.
E Adjust the needle protrusion while
the tattooing machine is switched on;
to do this, turn the handle. Turning
clockwise increases the protrusion of
the needle:
Turning counterclockwise reduces
the protrusion of the needle:
The needle protrusion changes
byapprox. 0.1mm per detent.
E Ensure that the index does not turn
while you turn the handle.
Max.
Min.