50 Cheyenne HAWK, HAWK SPIRIT & HAWK THUNDER
10 For questions or problems
If there is radio interference:
E First of all, disconnect all components,
e.g. the handle and connecting cable,
from the drive unit.
E Check all connections and
reassemble the components.
E Check the functions of the tattooing
machine again.
If the safety cartridge turns when
turning the handle:
E Ensure that the fixing nut is tightened
to the stop.
E Ensure that the small (1) and large
(2) O-ring:
• are undamaged
• are free from grease
• are seated in their appropriated
groove as shown below
E If the O-rings are damaged, have
them replaced by a specialist retailer.
If functional problems persist, and if
you have any questions or complaints,
please contact the specialist retailer
responsible.
To obtain information about our current
oers, the selection of safety cartridges
and accessories, please visit our website
www.cheyenne-tattoo.com.
11 Manufacturer declarations
11.1 Warranty declaration
With the Cheyenne HAWK, the HAWK
SPIRIT or the HAWK THUNDER, you
have purchased a high-quality branded
product. The reliability of this device
is assured through application of the
latest inspection technologies and
certification. MT.DERM GmbH is certified
in acc. with:
• DIN EN ISO 9001:2008 (quality
management system for quality
assurance)
• DIN EN ISO 13485:2012 (quality
management system for medical
products)
For this product, the statutory warranty
period of 2 years applies to radio
interference problems resulting from
defects in material and workmanship.
21
To Next Page
Loading...
