Cheyenne HAWK - Product-Dependent Safety Information; Important Hygiene and Safety Regulations

33
Cheyenne HAWK, HAWK SPIRIT & HAWK THUNDER
2.2 Product-dependent safety
information
E Never modify your tattooing machine,
the safety cartridges or their
accessories.
E Prevent fluids from entering the drive
unit.
E During the tattooing process, protect
the drive and its connecting cables
with a protective sleeve (see chap-
ter 5.3 on page 41). Also protect
thepower unit with a film.
E If you are not using your tattooing
machine, switch it o and place it in
a location so that it cannot fall down.
E Observe the technical data (chap-
ter 4.1 on page 38) and observe
the operating conditions (chapter
4.1 on page 38) and transport and
storage conditions (chapter 8 on page
49).
E Hand over your tattooing machine
to a specialist retailer for inspection
if it exhibits any external signs
of damage or if it does not function
inthe usual manner.
2.3 Important hygiene and safety
regulations
To prevent infectious diseases resulting
from tattooing being transmitted to
thecustomer or to the tattoo artist:
E Before use, follow the steps required
to disinfect the equipment (see
chapter 5.1 on page 39).
E During the tattooing process, wear
disposable nitrile or latex gloves and
disinfect them before use.
E Before applying a tattoo, clean
theaected areas of the customer's
skin with a mild cleaning and
disinfectant agent. When selecting
an appropriate disinfectant,take note
of the applicable regulations in your
country.
E For every customer and each ink,
always use new, sterile-packaged
safety cartridges. Before each
usage, ensure that the packaging is
undamaged and that the use-by date
has not passed.
E Dispose of used or defective safety
cartridges in a sharps container
(safety box) in accordance with
the regulations applicable in your
country.