Cheyenne HAWK - Transport and Storage Conditions; Disposal of Equipment

49
Cheyenne HAWK, HAWK SPIRIT & HAWK THUNDER
8 Transport and storage
conditions
ATTENTION
Damage to product caused by
dropping it
If your tattooing machine is dropped,
the motor or cable connection can be
damaged and the piston can be bent.
E Always place your tattooing
machine down so that it cannot fall.
E If your tattooing machine falls once,
perform a visual inspection and
conduct a noise test.
E Hand over your tattooing machine
to a specialist retailer for inspection
if it has visible signs of damage, if
the operating noise level changes
or if it stops functioning normally.
E Always transport your tattooing
machine and its accessories in
their original packaging. Use either
the supplied foam block to protect
the piston or leave the handle
assembled during transport.
E Always store your tattooing machine
and accessories under the following
conditions:
Ambient
temperature
-40 to +50 °C
-40 to +122 °F
relative
humidity
30 to 75%
Air pressure 200 to 1060hPa
9 Disposal of equipment
E Dispose of your tattooing ma-
chine and accessories bearing
the following designation in
accordance with the applicable regu-
lations for used electronic equipment.
If necessary, consult the specialist
retailer or the responsible authorities
to learn about applicable regulations.
E Provide containers at the workplace
for legislation-compliant disposal of
contaminated components.
E Dispose of used or defective safety
cartridges in a sharps container
(safety box) in accordance with
the regulations applicable in your
country or municipality.