53
Cheyenne HAWK, HAWK SPIRIT & HAWK THUNDER
Machine directive requirements used or complied with:
1.1.2; 1.1.3;1.1.5; 1.1.6; 1.2.2; 1.3.1; 1.3.2; 1.3.3;1.3.4;1.3.7; 1.5.1; 1.5.2; 1.5.4; 1.5.5; 1.5.6; 1.5.8;
1.5.9; 1.5.11; 1.5.13; 1.6.1; 1.6.3; 1.7.1.1; 1.7.4; 1.7.4.1;1.7.4.2; 1.7.4.3; 2.1; 2.1.1; 2.1.2; 2.2.1;
2.2.1.1
The special technical documentation according to Appendix VII Part B has been established.
The person authorized to compile the technical documentation agrees to hand over
thedocumentation upon justified request by the national authorities. The transfer will be made
by mail in paper form or on an electronic data medium.
It is forbidden to operate the product until it has been determined that the machine
inwhich theaforementioned product is to be installed meets all fundamental requirements
ofthemachine directive.
The aforementioned product meets the requirements of the following relevant directives:
• EMC Directive 2014/30/EU
• Machinery Directive 2006/42/EC
• RoHS Directive 2011/65/EU
Berlin, 10/1/2017
______________________________
Jörn Kluge, CEO, MT.DERM GmbH
To Previous Page
Loading...
