Chiltrix Inc. www.chiltrix.com
3.1 Communication Setting
Communication settings include settings for the protocol and baud rate. These settings should never
be changed. Fig 3-3
Enter the factory settings menus as shown in figure 3-1, the left is the "main menu", on the right are
the "P parameters". A complete list of P parameters starts on page 51. For Multi-pages, click on the
"Down arrow" to display the next page.
Main menu includes:
(1) Basic settings “P Parameters”
(2) Communication settings
(3) Others
3.2 OTHER FUNCTIONS
Initialize the control panel: The initialization of the control panel function is used to initialize all
parameters in the control panel back to factory settings. Figure 3-4
Delete the fault history: Deletes all historical faults, do not delete, let them roll over.
Password setting: To set the password to enter settings mode, do not change.
46
To Next Page
Loading...
