20
(3) UDP Client
Function Description
Destination IP Address 1:
Set the remote IP address and port number of the first group, the range of PORT is 0 ~ 65535, the
default value is 50002
Destination IP Address 2:
Set the remote IP address and port number of the second group, the range of PORT is 0 ~ 65535,
the default value is 50002
Destination IP Address 3:
Set the remote IP address and port number of the third group, the range of PORT is 0 ~ 65535, the
default value is 50002
Local Listen Port:
Set the local receiving port number, the default value is 50002, the range is 0 ~ 65535
Keep Alive Check:
When connected, a ping packet is sent to the Gateway Router to ensure the connection every 30
seconds.
To Next Page
Loading...