2.3.1 Installing the TCP/IP Protocol
If you are not sure whether the TCP/IP Protocol has been installed, follow these steps to check,
and if necessary, install TCP/IP onto your PCs.
Step 1：Click the “Start” button. Choose “Settings”, then “Control Panel”. Double-click the
“Network Connections” icon. Your Network window should appear as follows:
Step 2：
For Windows 98 and Millennium
On the “Configuration” tab (if using Windows 98 and Millennium PCs), select the TCP/IP line
for the applicable Ethernet adapter. Do not choose a TCP/IP entry whose name mentions
PPPoE, VPN. If the word TCP/IP appears by itself, select that line. Click the Properties button.
To Next Page
Loading...