Wound Component EST Scanner 19035/19035-M/19035-S
Quick Start Guide
23. Keep test cable away from the panel
Please keep the high voltage cable or the DUT away from the panel at
least 30 cm during operation to avoid the display interference caused
by high-voltage discharge.
24. Notices for connecting automated device
(1) The grounding system of the device and the automated station
should be connected together.
(2) Add anti-interference iron core to the high voltage cable and the
2 ends (device output and DUT) of RTN/LOW test cable with
winding at least 1 circle.
(3) The high voltage and RTN/LOW test cable must be separate
from the control cable.
(4) The high voltage and RTN/LOW test cable must keep proper
distance from the scanner panel.
11
To Next Page
Loading...
