EasyManua.ls Logo

cias MANTA - Page 38

cias MANTA
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CIAS Elettronica S.r.l. Ed. 1.5
Installation Handbook Page 37 of 57 MANTA 50 – 80
2° Example
(on a flowerbed or on a sidewalk)
Pole on a different level from the microwave working plane
The head is mounted on a flowerbed at a higher level to facilitate, for example, the
installation of a pole. The microwave lobe will then work on a different working plane.
3° Example
(changing slope)
Pole on a different level from the microwave working plane
The head is installed on a changing slope or a valley; the microwave lobe will then work on a
different working plane.
4° Example
(changing slope,
suggested installation
)
Pole on a different level from the working plane, for installation on not-aligned working planes.
Tx1 is on a different working plane from Rx1 placed instead on the working plane of barrier 2.
5° Example
(changing slope,
suggested installation
)
Pole on a different level from the working plane, for installation on not-aligned working planes.
Tx1 is on a different working plane from Rx1 placed instead on the working plane of barrier 2
.

Related product manuals