CIGWELD weldskill 250 - Optional Accessories

2-7
Manual No 0-5072
INTRODUCTION welDskIll 250, 350
December 1, 2008
2.10 Optional Accessories
Part Number Description
W4013200 Feed Roll 0.6 / 0.8 HARD
W4013201 Feed Roll 0.8 / 1.0 HARD
W4013202 Feed Roll 1.0 / 1.2 HARD
W4013204 Feed Roll 1.2 / 1.6 HARD
W4013205 Feed Roll 1.0 / 1.2 SOFT
W4013207 Feed Roll 1.2 / 1.6 SOFT
W4013208 Feed Roll 0.8 / 1.0 CORED
W4013209 Feed Roll 1.0 / 1.2 CORED
W4013211 Feed Roll 1.2 / 1.6 CORED
W4013212 Feed Roll 1.6 / 2.0 CORED
W4013214 Geared Adaptor
W4013215 Feed Roll Adaptor
W4013216 Plain Pressure Roll (top)
Table 2-3 Optional Accessories for 250
Part Number Description
W4013200 Feed Roll 0.6 / 0.8 HARD
W4013201 Feed Roll 0.8 / 1.0 HARD
W4013202 Feed Roll 1.0 / 1.2 HARD
W4013204 Feed Roll 1.2 / 1.6 HARD
W4013205 Feed Roll 1.0 / 1.2 SOFT
W4013207 Feed Roll 1.2 / 1.6 SOFT
W4013208 Feed Roll 0.8 / 1.0 CORED
W4013209 Feed Roll 1.0 / 1.2 CORED
W4013211 Feed Roll 1.2 / 1.6 CORED
W4013212 Feed Roll 1.6 / 2.0 CORED
W4013214 Geared Adaptor
W4013215 Feed Roll Adaptor
W4013216 Plain Pressure Roll (top)
Table 2-4 Optional Accessories for 350
NOTE
Four feedrolls are required for each electrode wire size used.